Electro-Thermal model of thermal breakdown in multilayered dielectric elastomers

Energy transduction of dielectric elastomers involves minute electrical and mechanical losses, both of which potentially increase the temperature within the elastomer. Thermal breakdown of dielectric elastomers occur when heat generated therein cannot be balanced by heat loss on the surface, which is more likely to occur in stacked dielectric elastomers. In this article an electro-thermal model of a multilayered dielectric elastomer able to predict the possible number of layers in a stack before thermal breakdown occurs is presented. Simulation results show that point of breakdown is greatly affected by an increase in surrounding temperature and applied electric field. Furthermore, if the stack diameter is large, thermal insulation of the cylindrical surface is a valid approximation. Two different expressions for the electrical conductivity are used, and it is concluded that the Frank-Kamenetskii expression is more conservative in prediction of point of breakdown than the Arrhenius expression, except at high surrounding temperature. © 2018 American Institute of Chemical Engineers AIChE J, 65: 859–864, 2019     

全尾砂最佳絮凝沉降浓度及调控方式研究

针对新疆某铜矿充填溢流跑浑现象严重、充填尾砂利用率低等问题，对影响尾砂沉降速度的主要因素进行了研究，包括尾砂粒级组成、表面形状和进砂浓度等。通过试验探究了进砂质量浓度分别为10%、15%和20%条件下尾砂沉降高度(H)与时间(T)之间的拟合关系式，其相关系数(R ²)均大于0.975，推导出最有利于该铜矿尾砂沉降的进砂浓度值为16%~17%。通过对比进砂浓度为16.5%条件下沉降试验实测值与预测值，证明该方法能够较好地预测尾砂的最佳沉降进砂浓度值。试验研究及分析为现场生产提供了实际指导，通过增加进砂浓度调节设施，并将各设施的相关参数在充填站控制系统中进行数据联锁，使进砂浓度始终保持在16%~17%之间，絮凝剂的添加量与进砂量匹配并维持在最佳添加量范围内，实现了砂仓顶溢流水澄清，提高了充填尾砂的利用率。     

Electrodeposition of amorphous Ni–P layers,thermal treatment and corrosion behaviour

The investigation reported comprises an experimental study of the thermal and corrosion properties of electrodeposited nickel-phosphorus amorphous alloy layers. The structure of the species was determined by means of X-ray diffraction spectroscopy. Samples with hypo- and hyper-eutectic compositions were synthesised out of modified classical and customised electrolytic solutions on copper substrates. The composition of the samples was determined via energy dispersive spectroscopy. A short review of the development of the composition of existing plating baths for Ni–P electrodeposition has also been presented. Thermal treatment of the samples has been carried out to crystallise the amorphous structure and to compare the thermal and the corrosion properties of the species with both types of structure. Differential thermal measurements were used to examine the thermal effects in the Ni–P samples obtained. The corrosion parameters of initial as-plated and thermally treated binary Ni–P alloy coatings were determined from Tafel plot analysis.     

Investigation of structural,optical, electrical,and magnetic properties of Fe-doped La0.7Sr0.3MnO3 manganites

In this work, the physical properties of nanocrystalline samples of La_0.7Sr_0.3Mn_1−xFe_xO₃ (0.0 ≤ x ≤ 0.20) perovskite manganites synthesized by the reverse micelle (RM) technique were explored in detail. The phase purity, crystal structure, and crystallite size of the samples were determined using X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. All the samples had rhombohedral crystal structure and crystallite size increased with increase in Fe content in La_0.7Sr_0.3MnO₃. The scanning electron micrographs (SEMs) exhibited smooth surface morphology and nonuniform shape of the particles. The optical properties studied using UV-visible absorption spectroscopy revealed a decrease in the absorbance and optical band gap with an increase in Fe content in La_0.7Sr_0.3MnO₃ compound. The temperature-dependent resistivity measurements revealed semiconducting nature of x = 0 and 0.1 samples up to the studied temperature range, while a metal-to-insulator transition was observed at higher Fe doping. Magnetic studies revealed weak ferromagnetism in all the samples and a reduction in the maximum magnetization with an increase in Fe content. A close correlation between electrical transport and magnetic properties was observed with the doping of Fe ion in La_0.7Sr_0.3MnO₃ at Mn site. These results advocate strong interactions associated with the double exchange mechanism among Fe³⁺ and Mn³⁺ ions.     

基于BP神经网络的条带刚凸特征回弹预测

为了研究核燃料组件格架的条带刚凸特征的回弹量与压边力、冲压速度、凸凹模间隙、摩擦系数等冲压工艺参数之间的关系,首先,获取包含50个GA拉丁超立方抽样的数据点以及10个随机抽样的数据点的数据集,前者作为训练集、后者作为测试集。将前者输入到BP神经网络进行训练,后者验证训练模型的精度。最后,通过响应面图研究各因素之间的交互作用以及各因素的敏感程度。结果表明:BP神经网络能够有效预测刚凸回弹量与冲压工艺参数之间的关系,相对于其他因素,压边力对回弹量的影响特别明显,冲压速度对回弹量的影响不明显,但与凸凹模间隙和摩擦系数有明显的交互作用。     

烟炱对电接触磨损的影响

选用常见的铜作为电接触材料,将烟炱溶液喷洒于试样表面,进行不同载荷下的电接触微动试验,用3D形貌仪和SEM对磨痕形貌进行分析。结果表明:载荷对材料的电接触性能影响显著,接触电阻与法向载荷成反比,即增加载荷可改善摩擦副的电接触性能;接触区域的有效导电面积是有限的,故载荷达到某一值后,随着载荷的增加,接触电阻不再有明显的下降趋势;小载荷下,烟炱的加入恶化了摩擦副的电接触性能,随着载荷的增加,这种恶化作用逐渐减小;摩擦因数随着载荷的增加而降低,载荷较低时(2～6 N),摩擦因数曲线可见明显的上升期、跑合期、下降期、稳定期;而载荷较高时(8～10 N),只有上升期和稳定期;大载荷下,触头接触区域匹配良好,摩擦副表面迅速达到了平衡点,摩擦因数较稳定。在电化学的作用下烟炱颗粒在摩擦副表面形成固体膜,起到减摩抗磨的作用。     

柴油机喷油器结构参数与磨料流加工效果关联的研究

基于磨蚀模型和多相流离散相模型建立了柴油机喷油器磨料流加工过程的CFD计算模型。在验证基础模型的有效性后,分别针对喷孔直径、喷孔锥角和交点位置三种结构参数进行变参数模拟计算。通过对加工域颗粒流速、湍流强度和磨蚀率的分析,获得了喷油器主要结构参数对液力研磨加工的影响机理:喷孔直径和喷雾锥度的变化对喷孔壁面磨蚀量的影响较大,随着两者的增大,喷孔壁面的磨蚀量有所增加;交点位置由上至下的变化对喷孔壁面磨蚀量的影响较小,但是喷孔入口处磨蚀量有所增加。     

面向流屑角突变建模的切削状态参数经验公式的获得及应用

从提高流屑角突变模型的预测精度出发,建立了切削状态参数与3个切削控制参数之间关系的新经验公式。提出了一种通过迭代法准确设定有限元仿真软件刀-屑摩擦因数的方法,并通过直角切削Al6061-T6工件的有限元仿真试验,获得了一组不同切削控制参数组合条件下的切削状态参数数据。根据该数据拟合出剪切角φ、刀-屑摩擦角β、剪切应力τs关于刀具前角γ0、进给量f和切削速度v的经验公式,并通过一组直角切削试验,验证了所得经验公式的有效性。将新建经验公式应用于流屑角突变建模过程后,所得模型关于突变临界切削宽度的平均预测误差减小了27.2%。     

水下连接器毂座加工工艺研究

针对水下连接器典型工件毂座的加工难点,通过研究其结构特点与材料特性,制定了工艺路线,并通过工艺试验,研究了抑制颤振和自适应插补在复杂型面数控加工中实现技术,确定了关键工序的工艺参数,满足了水下连接器毂座的加工精度和使用性能要求,也为类似结构加工制造提供借鉴。     

基于灰色关联度的微孔端面机械密封开启力共性影响参数分析

目前微孔端面机械密封采用的几何参数繁多,缺乏明确物理意义。为找出跨孔型的共性几何参数,基于Fluent多相流空化模型,针对矩形孔、菱形孔、椭圆孔端面机械密封,建立密封间隙流体的三维数值计算模型,计算得到144条开启力数据;在分析开启力和几何尺寸之间的关系、额外开启力产生机制的基础上,提出等效长度和等效宽度2个具有物理意义的几何参数;采用灰色关联度分析法,分析和验证等效长度、等效宽度、方向角、面积比对开启力的影响,发现4个因素对3种微孔密封的间隙流体开启力都有影响,但等效长度与等效宽度的影响较方向角、面积比大。